Vego 17" Tall 9-in-1 Modular Metal Raised Garden Bed

Arrange the metal panels into a long, narrow bed or a wider growing space. One kit offers nine layouts with 17-inch walls.

For changing the layout of one bed

Choose one layout before ordering soil: the nine arrangements use the same set of panels.

StyleOpen-bottom bed
MaterialVZ 2.0 coated galvanized steel

Choose the size or layout

Use the widest outside footprint to plan paths. For a soil order, measure between the inside walls after assembly and choose your filled depth; advertised dimensions can be rounded. Rectangular sizes below read length × width × height.

Scroll across the table to compare all measurements and plan a size.

Size / arrangementAdvertised dimensionsDocumented outside footprintInside dimensionsPlanting depthListed capacityPlan
3.5 × 6.5 ft78 × 42 × 17 inMeasure after assemblySize source · 2026-09-07Measure after assemblyChoose fill depth32 ft³Plan this size
2 × 8 ft96 × 24 × 17 inMeasure after assemblySize source · 2026-09-07Measure after assemblyChoose fill depth23 ft³Plan this size
5 × 5 ft60 × 60 × 17 inMeasure after assemblySize source · 2026-09-07Measure after assemblyChoose fill depth35 ft³Plan this size
2 × 6.5 ft78 × 24 × 17 inMeasure after assemblySize source · 2026-09-07Measure after assemblyChoose fill depth18 ft³Plan this size
3.5 × 5 ft60 × 42 × 17 inMeasure after assemblySize source · 2026-09-07Measure after assemblyChoose fill depth25 ft³Plan this size
3.5 × 3.5 ft42 × 42 × 17 inMeasure after assemblySize source · 2026-09-07Measure after assemblyChoose fill depth17 ft³Plan this size
2 × 5 ft60 × 24 × 17 inMeasure after assemblySize source · 2026-09-07Measure after assemblyChoose fill depth14 ft³Plan this size
2 × 3.5 ft42 × 24 × 17 inMeasure after assemblySize source · 2026-09-07Measure after assemblyChoose fill depth10 ft³Plan this size
2 × 2 ft24 × 24 × 17 inMeasure after assemblySize source · 2026-09-07Measure after assemblyChoose fill depth6 ft³Plan this size

Prepare and assemble this bed

Compare the material, bottom and care choices if you are still deciding between families. Follow the site preparation and liner checklist for the supporting surface.

  1. Choose the exact configuration and lay out its parts. Check the required tools in the selected kit instructions.
  2. Prepare a stable, level position and confirm the outside footprint with working paths.
  3. Check corners, fasteners, protective edging and any layout-specific braces against the kit instructions before adding fill.
  4. Measure the finished inside and outside separately, then update your plan. Preserve the maker’s fill restrictions.

Mark the outside footprint on the ground before assembly, including any legs or protruding corners. Leave a route for carrying bags, reaching the plants and maintaining nearby beds.

This bed is open to the ground. Check the soil and drainage where it will sit before adding fill. Its wall height is not a prescription for how deep the growing mix should be.

Product specifications