For a round garden bed
Vego 17" Tall 42" Round Metal Raised Bed
A round Vego steel bed 42 inches across and 17 inches tall, open at the bottom. Vego states 14 cubic feet of soil.
- Inside
- Measure after assembly
- Planting depth
- Choose fill depth
- Listed capacity
- 14 ft³
- Outside footprint
- Measure after assembly
For a round garden bed
Leave room to walk around it: from the edge, the center is 21 inches away.
- Style
- Open-bottom bed
- Material
- VZ 2.0 coated steel (zinc, aluminum and magnesium), 0.6 mm
- Warranty
- 2-year limited warranty against manufacturing defects in materials and workmanship, for the original purchaser in the United States.
- Bottom
- Open to the ground
Choose the size or layout
Use the widest outside footprint to plan paths. For a soil order, measure between the inside walls after assembly and choose your filled depth; advertised dimensions can be rounded. Rectangular sizes below read length × width × height.
Scroll across the table to compare all measurements and plan a size.
| Size / arrangement | Advertised dimensions | Documented outside footprint | Inside dimensions | Planting depth | Listed capacity | Plan |
|---|---|---|---|---|---|---|
| 42 in round, 17 in tall | 42 in diameter × 17 in tall | Measure after assemblySize source | Measure after assembly | Choose fill depth | 14 ft³ | Plan this size: 42 in round, 17 in tall |
Notes on these sizes
- 42 in round, 17 in tall: Vego also states 0.52 cubic yards.
Prepare and assemble this bed
Compare the material, bottom and care choices if you are still deciding between families. Follow the site preparation and liner checklist for the supporting surface.
- Choose the exact configuration and lay out its parts. Check the required tools in the selected kit instructions.
- Prepare a stable, level position and confirm the outside footprint with working paths.
- Check corners, fasteners, protective edging and any layout-specific braces against the kit instructions before adding fill.
- Measure the finished inside and outside separately, then update your plan. Preserve the maker’s fill restrictions.
Mark the outside footprint on the ground before assembly, including any legs or protruding corners. Leave a route for carrying bags, reaching the plants and maintaining nearby beds.
This bed is open to the ground. Check the soil and drainage where it will sit before adding fill. Its wall height is not a prescription for how deep the growing mix should be.