For a corner bed with rounded ends
Vegega 17" Tall L-Shaped Metal Raised Garden Bed
A 7 × 7 ft corner bed of Zn-Al-Mg coated steel with rounded ends, 17 inches tall, arms 2.5 ft wide. Vegega states 38.1 cubic feet. The bottom is open.
- Listed capacity
- 38.1 ft³
- Soil to fill it
- 26 bags of 1.5 ft³
The garden planner draws rectangles and circles, so it cannot draw this L-shaped bed. Use the stated capacity for a soil order.
For a corner bed with rounded ends
Vegega’s volume fills the bed to about its brim, and Vegega says 80 to 90% of a bed’s capacity is enough: about 30 to 34 cubic feet, 21 to 23 bags of 1.5 ft³ against 26 to the brim.
- Style
- Open-bottom bed
- Material
- Zn-Al-Mg coated steel, 0.6 mm panels, stainless steel screws
- Warranty
- 3-year limited warranty on the metal raised garden bed series, from the original date of purchase.
- Bottom
- Open to the ground
Choose the size or layout
Use the widest outside footprint to plan paths. For a soil order, measure between the inside walls after assembly and choose your filled depth; advertised dimensions can be rounded. Rectangular sizes below read length × width × height.
Vegega doesn’t publish inside measurements or an outside size for these beds, so the soil figure below is the maker’s own stated capacity. If you’ll fill it less deep, measure between the inside walls once it’s built.
| Size or layout | Advertised size | Listed capacity | Bags of 1.5 ft³ for that capacity | Plan |
|---|---|---|---|---|
| 7 × 7 ft | 84 × 84 × 17 in | 38.1 ft³ | 26 bags | Use the stated capacity |
Notes on these sizes
- 7 × 7 ft: Vegega also states an area of 27.22 sq ft.
Prepare and assemble this bed
Compare the material, bottom and care choices if you are still deciding between families. Follow the site preparation and liner checklist for the supporting surface.
- Choose the exact configuration and lay out its parts. Check the required tools in the selected kit instructions.
- Prepare a stable, level position and confirm the outside footprint with working paths.
- Check corners, fasteners, protective edging and any layout-specific braces against the kit instructions before adding fill.
- Measure the finished inside and outside separately, then update your plan. Preserve the maker’s fill restrictions.
Mark the outside footprint on the ground before assembly, including any legs or protruding corners. Leave a route for carrying bags, reaching the plants and maintaining nearby beds.
This bed is open to the ground. Check the soil and drainage where it will sit before adding fill. Its wall height is not a prescription for how deep the growing mix should be.
Product specifications
- Warranty Policy, Vegega