Menu

Find a calculator, bed size or guide

For a low cedar bed

Gardener’s Supply Cedar Raised Beds, 4 ft Wide

Frame an existing garden area with low cedar sides and aluminum corners. Four length choices share a four-foot width.

As an Amazon Associate I earn from qualifying purchases. It never changes which beds we list or the order they appear in. How this site is funded.

Shown: 4 × 6 ft natural cedar, 7¼-inch walls.

4 sizes and layouts

Each size drawn from above at the same scale, with the maker’s listed capacity.

Listed capacity
9 ft³
Soil to fill it
6 bags of 1.5 ft³
Planting depth
7.25 in
Drawn to scale from the maker’s figures: 48 in by 48 in, 7.3 in tall, 7.3 in planting depth.1224367.3 in7.3 in soil48 in × 48 in
Drawn from the maker’s published figures: the footprint from above on the left, the height on the right, in inches. Every bed on this site uses the same two scales.
Side view: 7.3 in tall, beside a 5 ft 6 in adult. It comes to below the knee.7.3 in tall48 in long · comes to below the knee
Side view beside an adult 5 ft 6 in tall, at one scale.

For a low cedar bed

A four-foot-wide bed needs access from both long sides for easier reaching. Include those paths when choosing the length.

Style
Bed on the ground
Material
Cedar with powder-coated aluminum corners
Warranty
A lifetime guarantee on every purchase, paid as store credit for the purchase price; normal wear and tear is not covered.

Choose the size or layout

Use the widest outside footprint to plan paths. For a soil order, measure between the inside walls after assembly and choose your filled depth; advertised dimensions can be rounded. Rectangular sizes below read length × width × height.

Gardener’s Supply doesn’t publish inside measurements or an outside size for these beds, so the soil figure below is the maker’s own stated capacity. If you’ll fill it less deep, measure between the inside walls once it’s built.

Size or layoutAdvertised sizeListed capacityBags of 1.5 ft³ for that capacityPlanting depthPlan
4 × 4 ft48 × 48 × 7.25 in9 ft³6 bags7.25 inPlan this size: 4 × 4 ft
4 × 6 ft72 × 48 × 7.25 in14 ft³10 bags7.25 inPlan this size: 4 × 6 ft
4 × 8 ft96 × 48 × 7.25 in18 ft³12 bags7.25 inPlan this size: 4 × 8 ft
4 × 12 ft144 × 48 × 7.25 in28 ft³19 bags7.25 inPlan this size: 4 × 12 ft

Notes on these sizes

  • 4 × 4 ft: Maker also states 230 quarts, without saying dry or liquid; the cubic feet are used.
  • 4 × 6 ft: Maker also states 360 quarts, without saying dry or liquid; the cubic feet are used.
  • 4 × 8 ft: Maker also states 460 quarts, without saying dry or liquid; the cubic feet are used.
  • 4 × 12 ft: Maker also states 720 quarts, without saying dry or liquid; the cubic feet are used.

What to plant in it

Four planting plans drawn to scale, a salad bed, a kitchen bed with herbs, tomatoes and peppers, and roots and onions, with every plant counted: 4 × 4 ft bed · 4 × 6 ft bed · 4 × 8 ft bed · 4 × 12 ft bed.

What comes in the box

Parts

  • Cedar boards
  • 4 aluminum corners and their black caps
  • ¾-inch stainless steel Phillips screws
  • For the 4 × 12 ft size, in-line connectors that join two 6-ft boards along each long side

Tools you need

  • A screw gun with a Phillips tip
  • A rubber mallet or hammer

Before and while you build

  • On a lawn, Gardener’s Supply suggests lifting the sod and loosening the soil 6 inches deep first.
  • Each board has a smooth side and a rough side: choose which faces out before sliding the boards into the corners.
  • Seat every board fully, level with the bottom of its corner, then screw through every hole in the corners.

From Gardener’s Supply’s assembly instructions (PDF).

Prepare and assemble this bed

Compare the material, bottom and care choices if you are still deciding between families. Follow the site preparation and liner checklist for the supporting surface.

  1. Choose the exact configuration and lay out its parts. Check the required tools in the selected kit instructions.
  2. Prepare a stable, level position and confirm the outside footprint with working paths.
  3. Check corners, fasteners, protective edging and any layout-specific braces against the kit instructions before adding fill.
  4. Measure the finished inside and outside separately, then update your plan. Preserve the maker’s fill restrictions.

Mark the outside footprint on the ground before assembly, including any legs or protruding corners. Leave a route for carrying bags, reaching the plants and maintaining nearby beds.

This bed stands on the ground; its maker does not say whether it has a bottom, so look at the parts before you fill it. Check the soil and drainage where it will sit before adding fill. Its wall height is not a prescription for how deep the growing mix should be.

Product specifications