Menu

Find a calculator, bed size or guide

For a steel planter at waist height or on wheels

Anleolife Elevated Metal Raised Garden Beds

Galvanized steel planters on legs in two sizes: 4 × 1.5 ft at 35 inches tall, about waist height, and 4 × 2 ft at 22 inches on low wheels. Each plants 1 ft deep. Anleolife states 6 and 8 cubic feet of soil.

2 sizes and layouts

Each size drawn from above at the same scale, with the maker’s listed capacity.

Listed capacity
6 ft³
Soil to fill it
4 bags of 1.5 ft³
Planting depth
12 in
Drawn to scale from the maker’s figures: 48 in by 18 in, 35 in overall height, 12 in planting depth.12243635 in12 in soil48 in × 18 in
Drawn from the maker’s published figures: the footprint from above on the left, the height on the right, in inches. Every bed on this site uses the same two scales.
Side view: 35 in overall, beside a 5 ft 6 in adult. It comes to hip height.35 in overall48 in long · comes to hip height
Side view beside an adult 5 ft 6 in tall, at one scale.

For a steel planter at waist height or on wheels

The 35-inch planter takes 4 bags of 1.5 ft³ and the 22-inch one 6, by Anleolife’s capacities. Each page’s dimensions row says 4 × 4 ft, against the 4 × 1.5 and 4 × 2 ft of its title and planting area: measure the box before you order a liner or a cover for it.

Style
Elevated planter
Material
Galvanized steel, 0.8 mm corrugated panels
Warranty
Anleolife’s pages promise a “20-year anti-rust warranty” in a store-wide line, with no terms.

Planting from a wheelchair, or looking for a bed you don’t have to kneel at? Accessible raised beds gives the heights, widths and knee room that work.

Planning a balcony, deck or roof garden? Have the surface assessed for the filled weight before buying the planter. Its own load rating does not establish what the surface can carry. Work out the filled weight for whoever checks it.

Choose the size or layout

Use the widest outside footprint to plan paths. For a soil order, measure between the inside walls after assembly and choose your filled depth; advertised dimensions can be rounded. Rectangular sizes below read length × width × height.

Anleolife doesn’t publish inside measurements or an outside size for these beds, so the soil figure below is the maker’s own stated capacity. If you’ll fill it less deep, measure between the inside walls once it’s built.

Size or layoutAdvertised sizeListed capacityBags of 1.5 ft³ for that capacityPlanting depthPlan
4 × 1.5 ft, 35 in tall48 × 18 × 35 in6 ft³4 bags12 inPlan this size: 4 × 1.5 ft, 35 in tall
4 × 2 ft, 22 in tall, on wheels48 × 24 × 22 in8 ft³6 bags12 inPlan this size: 4 × 2 ft, 22 in tall, on wheels

Notes on these sizes

  • 4 × 1.5 ft, 35 in tall: In quartz gray, chestnut brown or antique white.
  • 4 × 2 ft, 22 in tall, on wheels: It stands on low wheels, in quartz gray, chestnut brown or antique white.

Where the maker’s figures disagree

  • Each page's dimensions row gives a 4 × 4 ft footprint (4 × 4 × 3 ft and 4 × 4 × 1.8 ft); its title, its planting area (6 and 8 sq ft) and its capacity (6 and 8 cubic feet) all describe a 4 × 1.5 ft and a 4 × 2 ft box, 1 ft deep. The sizes here follow the titles.

Measure the inside of the assembled bed before ordering soil.

What to plant in it

A planter on legs suits the crops whose main roots stay in the top 6 to 12 inches: what to plant in a raised bed with legs.

Four planting plans drawn to scale, a salad bed, a kitchen bed with herbs, tomatoes and peppers, and roots and onions, with every plant counted: 2 × 4 ft bed.

Prepare and assemble this bed

Compare the material, bottom and care choices if you are still deciding between families. Follow the site preparation and liner checklist for the supporting surface.

  1. Choose the exact configuration and lay out its parts. Check the required tools in the selected kit instructions.
  2. Prepare a stable, level position and confirm the outside footprint with working paths.
  3. Check floor supports, drains, supplied liner and the chosen leg or caster hardware before filling. Confirm the support beneath the planter for the filled load.
  4. Measure the finished inside and outside separately, then update your plan. Preserve the maker’s fill restrictions.

Mark the outside footprint on the ground before assembly, including any legs or protruding corners. Leave a route for carrying bags, reaching the plants and maintaining nearby beds.

This planter has a floor. Use the intended planting depth, not the height of its legs, to estimate fill. Account for drainage and the filled weight when choosing a level location.

Product specifications